DMP 1” Mechanical Seam Panel
Panel Information
- Panel Type: Wall / Soffit
- Panel Width: 12”
- Seam Height: 1”
- Panel Material: 22 ga – 26 ga min (Steel) / .027, .032, .040 (Aluminum)
- Panel Surface Options: Smooth / Flat Beads / Pencil Ribs / Perforations
- Panel Clip: Required Per Engineering
- Minimum Slope: 2/12
- Substrate: Plywood, B-Deck, B-Deck w/ISO
Panel Testing:
- Uplift Resistance: ASTM E 1592, UL 90
- Air Infiltration: ASTM E 283
- Water Penetration: ASTM E 331
Panel Notes:
- This panel uses a 16” coil.
- This panel uses 4” of material to form the panel.
- If you take the square footage of the roof and multiply that by 1.25, the total will be the amount of coil needed to manufacture the panels.
- Perforation opening size .50 [12.7] X .12 [3.0] = .06 Sq. In. [38.7 sq. mm.]
- Openings per 12 inch length [304.8 mm] = 51.25
- Net Free Area / 12 inch = .06 Sq. In. X 51.25 = 3.08 Sq. In. [Net Free Area 1304.8mm = 38.7 sq. mm X 51.25 = 1983 sq. mm]
Downloads:
- Installation Manual for All SMI Profiles: Wood Substrates
- Installation Manual for All SMI Profiles: Metal Substrate
- Installation Manual for All SMI Profiles: Metal SubstrateW/ ISO
