DMP 1.5” Snaplock 450 Panel
Panel Information
- Panel Type: Standing Seam
- Panel Seam: Snaplock
- Panel Width: 16”
- Seam Height: 1.5”
- Panel Material: 22 ga – 26 ga min
- Panel Surface Options: Smooth / Striations / Flat Beads / Pencil Ribs
- Panel Clip: Required Per Engineering
- Minimum Slope: 3/12
- Substrate: Plywood
Panel Testing:
- Uplift Resistance: UL 580, UL 1897, UL 90
- Hail Rating: Class 4 Impact UL 2218
- Fire Rating: UL Class A
- Texas Department of Insurance Approval: RC-561
Panel Notes:
- With 24 gauge, 16” panel engineering, you may opt to use heavier gauge coil and narrower width panels. Clip spacing will not change.
- This panel uses a 20” coil.
- This panel uses 4-⅛” of material to form the seams.
- If you take the square footage of the roof and multiply that by 1.25, the total will be the amount of coil needed to manufacture the panels.
- This panel is approved for Weathertight Warranties.
Downloads:
- Installation Manual for All SMI Profiles: Wood Substrates
- Installation Manual for All SMI Profiles: Metal Substrate
- Installation Manual for All SMI Profiles: Metal SubstrateW/ ISO
