Metal Roofing Systems

Metal Roofing Systems

DMP 100 SL & DMP 150 SL Snap-Lock

The DMP 100 or 150 SL standing seam systems have a wide variety of applications. The DMP 100 series is more commonly found on residential housing. Its low seam height allows for an enhanced architectural design without the commercial system appearance. The DMP 150 with its high seam, adds structural strength and more water carrying capabilities commonly found on larger commercial applications. Both series may also be used on equipment screens, mansards and canopys that require open framing systems.

They are available in 24 or 26 ga. painted steel, .032 painted aluminum and 16 or 20 oz. architectural copper. (Stiffening ribs optional)

View the color options for the DMP 100 SL and DMP 150 SL below 

View the color options for the DMP 175 SL Structural Snap-Lock below 

22 ga. steel

24 ga. steel

26 ga. steel

DMP 175 SL Structural Snap-Lock

The DMP 175 SL standing seam system provides a full structural standing seam engineered for a wide variety of uses in the commercial roof industry. Its structural performance allows it to be used over large spans up to 5 feet.

Commonly used on pre-manufactured buildings with purlin systems, also 22 ga. steel deck systems with rigid insulation and premanufactured truss systems with hat channel, as well as plywood substrates

Concealed clips and fasteners allow for proper expansion and contraction on long panel applications. This system is also available in 26, 24, and 22 ga. painted steel. (Stiffening ribs optional)

DMP 100 ML & DMP 150 ML Mechanical Lock

The DMP 100 or 150 ML standing seam system has a traditional locking seam which is mechanically locked after installtion by a mechanical seamer. The seam can be single locked at 90 degrees or double locked at 180 degrees for enhanced wind load design. Concealed fasteners and a floating clip design allows for greater expansion and contraction. Typical installation is over plywood substrate with 30 lb. felt underlayment. 

This system is available in 24 or 26 ga. painted steel, .032 painted aluminum, and 16 or 20 oz architectural copper. (DMP 150 ML is tested to ASTM 1592)

View the color options for the DMP 175 SL Structural Snap-Lock below 

View the color options for the DMP 200 ML Mechanical Lock below

DMP 200 ML Mechanical Lock

The DMP 200 ML structural mechanical lock systems offers the ultimate leakproof and wind uplift capabilities for commercial applications. Its 2″ seam height offers superior structural support for wide span applications up to 6 feet. 

It can be mechanically seamed at a 90 degree single lock or at a 180 degree double lock, providing a proven seaming process in conjunction with a floating clip assembly that gives it the ultimate commercial roof system integrity.

It is commonly used on mini storage projects, premanufactured buildings with purlin systems, truss systems with hat channel and 22 ga. steel deck on ridge installation as well as plywood substrates

DMP 100 BC Batten Cap

The DMP 100 BC standing seem system has a distinctly different look that enhances the appearance of typical metal and shingle combinations. Also using concealed fasteners and clips, this systems is very popular in the residential accent roof market. Its bi-directional design makes the installation easy for almost any installer. 

Typical application is over plywood substrates with a 30 lb. felt underlayment. This system also works well on mansards that have inside or outside knuckle designs, making it a ligh commercial system as well.

This system is available in 24 or 26 ga. painted steel, .027 or .032 painted aluminum, and 16 or 20 oz. architectural copper

View the color options for the DMP 100 BC Batten Cap below